Research

Faculty Name Paper Title Journal Name Journal No Volume No Issue No Page No Publication Year Publisher Co-Auther Publish Date
K.L.A. KHAN ZnSe sintered films: Growth and characterization Applied Surface Science 253 7 June 2007
ASHISH KARNWAL Performance Evaluation of a Medium Capacity Diesel Engine on Thumba Biodiesel and Diesel Blends Journal of Biofuel 2 1 172-181 July-Dec 2010
SANDEEP CHHABRA Experimental study on modified single slope single basin active solar still Desalination ISSN: 0011-9164 Impact Factor-3.96 367 69-75 July-2015 Elsevier
SANDEEP CHHABRA Parametric investigation of an active solar distillation system January-2014 ONGC India Expo Mart, Greater Noida 13/01/2014
K.L.A. KHAN Effect of compaction pressure on green and sintered properties of ceramic compacts and their wear behaviour January 2004 2004-01-02
K.L.A. KHAN Characterization of open-cell aluminium foam made by sintering and dissolution process Transactions of PMAI 33 December 2007 Noida 2007-02-09
K.L.A. KHAN Study for optimization of tilt angle to receive Maximum solar radiation August 2012 Gaziabad
K.L.A. KHAN Effect of copper and silicon of wear behavior of aluminium August 2012 Gaziabad
K.L.A. KHAN Synthesis and characterization of Al foam, Al alloy foam and Al-SiC composite foams Transactions of IIM 2 61 April 2008 Kanpur 2007-12-07
NEHA KATIYAR Nano-hierarchical Hydrophobic Structure of Polycarbonate Fumed Silica Composites as a Thermal Barrier International Journal of Engineering Technology Science and Research ISSN 2394-3386 3 8 27-35 2016 New Delhi 2016-08-21
PRASHANT VASHISHTHA Enhancement of Surface Hardness of Aluminium 6061 Alloy using WC particles International Journal of Engineering Technology, Management and Applied Sciences ISSN 2349-4476 4 8 155-159 2016 New Delhi 2016-08-21
SMRITI MISHRA Optimal Availability Analysis of Brake Drum Manufacturing System by using Markov Approach International Journal of Engineering Technology, Management and Applied Sciences ISSN 2349-4476 4 8 147-154 2016 New Delhi 2016-08-21
NEHA BHADAURIA Optimised MIG Welding Process Parameters for IS2062 Mild Steel to Obtain Optimum Bead Height International Journal of Research in Mechanical Engineering ISSN 2347-5188 4 4 40-46 2016 New Delhi
RUPESH CHALISGAONKAR Investigation of the machining parameters and integrity of the work and wire surfaces after finish cut WEDM of commercially pure titanium Journal of the Brazilian Society of Mechanical Sciences and Engineering ISSN 1678-5878: J Braz. Soc. Mech. Sci. Eng. DOI 10.1007/s40430-015-0335- 2015 Springer
RUPESH CHALISGAONKAR Investigation of wire consumption and wear mechanism in trim cut WEDM operation of commercially pure titanium Materials Science Forum doi:10.4028/www.scientific.net/MSF.808.43 Vol. 808 pp 43-50 2015 Trans Tech Publications, Switzerland
SUBODH KR. SHARMA Thermo- Mechanical Analysis of AV1 Diesel Engine Piston Using FEM Journal of Advanced Engineering Research 2 1 23-28 2015
SUBODH KR. SHARMA Experimental Thermal Analysis of Diesel Engine Piston and Cylinder Wall Journal of Engineering ISSN: 2314-4912 (Online) DOI: 10.1155/3962 aip Article ID 178652 2015 Hindawi Publishing Corporation
ASHISH KUMAR SINGH Performance and Emission Studies of Diesel Engine Fuelled with Orange Peel Oil and N-Butanol Alcohol Blends 2015 SAE Pune 2015-01-21
PRATIBHA KUMARI A Review Paper on Effect of GMAW Process Parameters International Review of Applied Engineering 4 1 23-26 2014
RUPESH CHALISGAONKAR Parametric optimization and modelling of rough cut WEDM operation of pure titanium using grey-fuzzy logic and dimensional analysis Cogent Engineering : Part of Taylor Francis (2014), 1: 979973, http://dx.doi.org/10.1080/23311916.2014.979973 1-28 2014 Taylor & Francis online
RUPESH CHALISGAONKAR Process capability analysis and optimization in WEDM of commercially pure titanium Procedia Engineering 97 758 – 766 2014 ELSEVIER
RUPESH CHALISGAONKAR Multi-response optimization and modeling of trim cut WEDM operation of commercially pure titanium (CPTi) considering multiple user s preferences Engineering Science and Technology an International Journal http://dx.doi.org/10.1016/j.jestch.2014.10.006 2014 ELSEVIER
RUPESH CHALISGAONKAR Microstructural characteristics of pure titanium by WEDM Int. J. Microstructure and Materials Properties, Vol. 9, No. 6, 463-483 2014 Inderscience UK
PRATIBHA KUMARI EFFECT OF WELDING PROCESS PARAMETERS ON MECHANICAL PROPERTIES OF MILD STEEL (IS-2062) BY USING FACTORIAL DESIGN APPROACH" International Journal of Engineering Studies. 1 1 ISSN 0975-6469 53-62 2014 Research India Publications
SUBODH KR. SHARMA Computational Modeling for Thermal Analysis of AV1 Diesel Engine Valve using FEM International Journal of Smart Business and Technology 2 2 1-13 2014
PIYUSH PANT Experimental study of surface roughness in WEDM process and ANN modeling International Journal of Engineering and Advanced Technology, Volume 3-5 57-61 2014 International Journal of Engineering and Advanced Technology
SUBODH KR. SHARMA Effect Of Brown Gas On The Performance Of A Four Stroke Gasoline Engine International Journal of Emerging Technology and Advanced Engineering ISSN 2250-2459 4 1 300-308 2014
PIYUSH PANT Prediction of surface roughness in WEDM process using Feed Forward Backpropagation neural network International Journal of Advanced Mechanical Engineering No. 6 Volume 4, 667-674 2014 research india publications
PIYUSH PANT Prediction of surface roughness in WEDM process using feed forward backpropagation neural network 2014 research india publications JNU, New Delhi
VIPUL VIBHANSHU Experimental Investigation of Performance and Emission Characteristics of Blends of Jatropha Oil Methyl Ester and Ethanol in Light Duty Diesel Vehicle Journal of Engineering Research and Applications ISSN : 2248-9622 4 2 374-383 2014 Int. Journal of Engineering Research and Applications
VIPUL VIBHANSHU Assessment of the Performance and Emission Characteristics of 1-Octanol/Diesel Fuel Blends in a Water Cooled Compression Ignition Engine 2014 SAE INTERNATIONAL Birmingham, United Kingdom. 2014-10-20
ARUNESH CHANDRA Implementation of Virtual Reality in the Conceptual Design of a Tractor Trailer International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering 8 8 1376-1382 2014
ANURAG GUPTA Effect of Glass Fiber and Filler Volume Fraction Variation on Mechanical Properties Of GFRP Composite Proceedings of the International Conference on Research and Innovations in Mechanical Engineering Lecture Note Series ISSN 2195-4356 pp 407-414 2014 Springer India Guru Nanak Dev Engineering College, ludhiana 2013-11-24
KUMARI ARCHANA Effect of Welding Process Parameters on Mechanical Properties of Mild Steel (Is-2062) by Using Factorial Design Approach Pratibha International Journal of Engineering Studies. ISSN 0975-6469 6, pp. 53-62 2013-14 Research India Publications
RUPESH CHALISGAONKAR Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi’s DOE approach and utility concept Front. Mech. Eng. 2013, DOI 10.1007/s11465-013-0256-8 8(2) 201–214 2013 Higher Education Press and Springer-Verlag Berlin Heidelberg 2013
LEAN MANUFACTURING - “AN APPROACH FOR IMPROVING PRODUCTION EFFICIENCY AND CUSTOMER RESPONSE” 2013 Department of Mechanical Engineering Haryana Institute of Technology Aso 2013-03-16
IMPROVING THE OEE BY IMPLEMENTING TPM PILLARS 2013 Department of Mechanical Engineering Haryana Institute of Technology Aso 2013-03-16
Identification of Risks and its Mitigation in Supply Chain Management 2013
SUBODH KR. SHARMA Modelling and analysis of radial thermal stresses and temperature field in diesel engine valves with and without air cavity International Journal of Engineering, Science and Technology 5 3 111-123 2013 Multi Craft
SUBODH KR. SHARMA Thermal analysis of AV1 diesel engine valve using FEM Vol 4, pp 123-128 2013 proceedings by InderScience Publishers APIIT, Haryan 2013-11-16
VIPUL VIBHANSHU “Experimental Investigation of Diesel Engine Fuelled with Jatropha oil Blend with Ethanol” SAE Journal of Fuels and Lubricants 6 3 951-958 2013 SAE INTERNATIONAL
VIPUL VIBHANSHU An Experimental Investigation on Performance and Emission Studies of a Single Cylinder Diesel Engine Fuelled with Blends of Diesel and Mahua oil Methyl Ester 2013 SAE INTERNATIONAL Michigan, USA 2013-04-16
VIPUL VIBHANSHU “Potential Utilization of Higher Alcohols in Unmodified Diesel Engine” 2013 ASME SAN DIEGO, CA USA 2013-11-15
VIPUL VIBHANSHU Experimental Investigation of Orange Peel Oil Methyl Ester on Single Cylinder Diesel Engine 2013 SAE INTERNATIONAL Capri, Napoli, Italy 2013-09-15
VIPUL VIBHANSHU “Performance Analyses of Diesel Engine at Different Injection Angles Using Water Diesel Emulsion” 2013 SAE INTERNATIONAL CANADA
VIPUL VIBHANSHU “Combustion, Emission And Performance Characteristics Of A Single Cylinder Diesel Engine Fuelled With B20 Cotton Seed Oil Biodiesel” 2013 Delhi Technological University, Delhi, India 2013-10-25
ARUNESH CHANDRA Estimation of hand index for male industrial workers of Haryana State (India) ); International Journal of Engineering, Science and Technology 5 1 55-65 2013
ARUNESH CHANDRA Investigating the effect of process parameters on the mechanical properties of A713 sand cast Aluminium alloy by using Taguchi method International Journal of Advances in Engineering and Technology 6 5 2274-2285 2013
PRASHANT VASHISHTHA Optimization of process using robust design 2013 Shriram Group of Colleges,Muzaffarnagar 2013-04-08
ANURAG GUPTA Role of Packing in Enhancing the Sales Appeal journal Global Research Analysis ISSN No 2277 2 7 111-113 2013
Study for optimization of tilt angle of solar to Receive maximum Radiation, ITME-2012 KIET,Ghaziabad 2012 KIET GZB
2. Effect of copper and Silicon of wear behaviour of aluminium, ITME -2012 KIET, Ghaziabad 2012 KIET GZB
NITIN SHARMA Optimization of cutting parameters for surface roughness in turning International Journal of Advanced Research in Engineering & Technology (IJARET) ISSN 0976 - 6480 (print), ISSN 0976 - 6499 (online) 3 1 86-96 2012
NITIN SHARMA Optimization of process parameters of wire electrical discharge machining of AISI 316l International Journal of Mechanical Engineering & Technology (IJMET) ISSN 0976 – 6340 (print), ISSN 0976 – 6359 (online) 3 2 317-327 2012
ARUNESH CHANDRA Hand Anthropometric Survey of Male Industrial Workers of Haryana State (India) International Journal of Industrial and Systems Engineering 9 1 98-120 2011
ARUNESH CHANDRA Analysis of Hand Anthropometric Dimensions of Male Industrial Workers of Haryana State (India) International Journal of Engineering 5 3 242-256 2011
ARUNESH CHANDRA Ergonomic Design of Hand tool (Screwdriver) for Indian Workers Using Comfort Predictors: A Case Study International Journal of Advanced Engineering Technology 2 4 231-238 2011
ASHISH KARNWAL Optimization of Diesel Engine Performance Parameters by applying Taguchi Method and Grey Relational Analysis 2011 9th International Oil and Gas Conference and Exhibition being held at Ne 2011-10-31
ASHISH KARNWAL Multi Response Optimization of Diesel Engine Performance Parameters Using Thumba Biodiesel-Diesel Blend by Applying Taguchi Method and Grey Relational Analysis International Journal of Automotive Technology, published by Springer 4 10 599-610 2011
DEEPAK KR. SINGH Environmental Effect on Gas Cooler Design for Trans-critical Carbon Dioxide Refrigeration System in Indian Context Journal of Advanced Research in Mechanical Engineering ISSN: 17379318 Volume No. 1 Issue No. 3 pp. 147-152 2010 HyperSciences Publisher
ARUNESH CHANDRA An Anthropometric Survey of Industrial Workers of the Northern Region of India International Journal of Industrial and Systems Engineering 6 1 110-128 2010
ASHISH KARNWAL Some Experimental Studies on Utilization of Jatropha Curcus and Pongamia Piñata Biodiesel Blends in an Agriculture Diesel Engine International Journal of Theoretical and Applied Mechanics (IJTAM) 1 5 15-25 2010
ASHISH KARNWAL Production of Biodiesel from Thumba oil: Optimization of process parameters International Journal of Energy and Environment (IJEE) 4 1 351-357 2010
NEHA BHADAURIA Optimizing the Power Output of Air Bottoming Cycle International Journal of Applied Engineering Research 4 10 1871-1876 2009 Research India Publications
SUBODH KR. SHARMA Renewable Source of the Bio-based Energy in the 21st Century 263-271 2009 Department of Mechanical Engineering Moradabad Institute of Technology, 2009-02-28
SUBODH KR. SHARMA Environment Friendly Fuels for Vehicles 257-262 2009 Department of Mechanical Engineering Moradabad Institute of Technology, 2009-02-28
ARUNESH CHANDRA Quality Tools to Reduce Crankshaft Forging Defects: An Industrial Case Study Journal of Industrial and Systems Engineering 3 1 27-37 2009
ARUNESH CHANDRA Estimation of Individual Power of Noise Sources Operating Simultaneously International Journal of Environmental Science and Engineering 1 2 81-86 2009
ASHISH KARNWAL Evaluation of Oxidation Stability of Different Biodiesel Samples 2009 Petrotech–2009, 8th International Oil and Gas Conference and Exhibition 2009-01-11
NITIN SHARMA Life Cycle Cost Analysis Of Single Slope Passive Solar Still 2008 Krishna Institute of Engineering & Technology, Ghaziabad 2008-06-27
ASHISH KARNWAL Overview of Utilization of Jatropha Curcus & Pongamia Pinata for Sustainable Production of Biodiesel in India 2007 International Conference organized by Winrock International New Delhi 2007-02-01
K.L.A. KHAN Microstructure and Mechanical properties of open-cell aluminium foam made by SDP 2006 IIT Kharagpur 2006-02-03
NAVIN KUMAR Support Analysis of Horizontal Pressure Vessel Using FEA Applied Mechanics and Materials 592-594 1220-1224 2014
AJAY KUMAR Stress-Strain Curve of Polymer Nanocomposites by Finite Element Modeling IIT, Madras 2013-04-07
ASHOK KUMAR Study for optimization of tilt angle of solar to Receive maximum Radiation, ITME-2012 KIET,Ghaziabad
SUBODH KR. SHARMA MODELLING OF ILLUMANTION EFFECTS ON INDUSTRIAL WORKER PERFORMANCE 993-998 Dr B R Ambedkar National Institute of Technology, Jalandhar 2010-08-09
VIPUL VIBHANSHU Performance, Emission and Combustion, Analysis of Diesel Engine Fueled with Blends of Mahua Oil Methyl Ester and Diesel SAE INTERNATIONAL Birmingham, United Kingdom. 2014-10-20
VIPUL VIBHANSHU “Utilization of Blends of Jatropha Oil & N-Butanol in a Naturally Aspirated Compression Ignition Engine” SAE INTERNATIONAL Korea 2013-10-21
ARUNESH CHANDRA Ergonomic Design and Evaluation of Hand Implements: A Review Indian Institute of Technology, Guwahati 3/12/2014
ARUNESH CHANDRA Index for Quality Control in Hand Anthropometric Surveys BBDIT Ghaziabad 05/04/2013
ARUNESH CHANDRA Ergonomics in the Office Environment: A Review Chandigarh 19/03/2009
ARUNESH CHANDRA Estimation of Individual Power of Noise Sources Operating Simultaneously Chandigarh 19/03/2009
ARUNESH CHANDRA Achieving Flexibility and Responsiveness in SMES through a Holistic Approach to Information System Design National Institute of Technology, Hamirpur 27/12/2007
K.L.A. KHAN Synthesis and mechanical properties of open-celled aluminium foam IIT Delhi 2008-12-15
K.L.A. KHAN Mechanical behaviour of open-cell aluminium foam made by SDP IIT Madras 2006-12-18
ASHISH KARNWAL New Frontiers in Biofuels 2010-01-18
ASHISH KARNWAL Parametric Study of an Active Solar Distillation System New Delhi, India 2014-01-13