Our Infrastructure



LABS

The department has the following well-equipped laboratories to supplement theory with practicals

  1. Antenna & Microwave Lab.
  2. Optical Communication & Networking Lab.
  3. Network Analysis & Synthesis Lab.
  4. Control System Lab.
  5. Advance Integrated Circuit Lab.
  6. E-Yantra Lab
  7. Internet Lab.
  8. Digital Signal Processing Lab.
  9. Optical Integrated Circuit Lab (M.Tech.).
  10. Advanced Communication Lab (M.Tech.).
  11. Advance PCB Lab.
  12. Electronics Workshop & PCB Lab.
  13. Logic Design Lab/Digital Electronics Lab.
  14. Electronic Device Lab/ Electronics Circuit Lab
  15. Communication Lab I/Communication Lab II.
  16. Integrated Circuit Lab.
  17. Project Lab.
  18. Microprocessor Lab.
  19. Innovation Lab (TEXAS).
  20. Centre of Robotics & Mechatronics.
  21. KIET-NI Labview Academy Lab.
  22. M.Tech. Simulation Lab.
  23. Electronics Circuit Design Lab.
  24. CAD of Electronics Lab.

Innovation Lab (TEXAS)

Texas Instruments Analog System design lab(Innovation lab) has been set up in ECE department by TEXAS instrument under TI India University Program providing six advanced analog system design (ASLK Pro) experimental setups to train ECE faculty and students in advanced industry based technologies.

Advance Communication Lab(M.Tech.)

Advanced Communication Lab is catering to the needs of the advanced facilities in communication field by training its students to make valuable contribution. This lab is used by B.Tech, M.Tech students to enhance their skills in communication field and also used for their final semester thesis. Apart this faculty members who are involved in research work also used it for their research purpose.

Antenna & Microwave Lab

Microwave and Antenna Lab is used by B.Tech students to enhance their skills in Microwave Communication field . It consist of various microwave benches having Klystron and Gunn diode as microwave sources. By using these benches we can find out various characteristics of microwave devices like couplers, tees, circulators, isolators etc. This lab also includes experiments of optical fiber communication & various antennas. By using the Trainers, we can develop analog and digital communication link and also used for verification of multiplexing and demultiplexing of signals The objective of the lab is to prepare students with a good foundation in communication field so that they become graduate and effective system engineers.

Optical Communication & Networking Lab

This lab is designed to present the key elements driving the growth in optical communication and networking systems. Within the lab the principles of optical fiber are presented also, framing in digital time division multiplexing is described. Furthermore, this lab demonstrate various components and commands of networking such as Cat5 cable, RJ 45 Connector, Crimping Tool , Wire Stripper etc. In particular, it presents detailed coverage of Configuring router, web servers, DHCP servers and VLAN. The lab aims to provide specialized knowledge of the methodologies and techniques involved in the design and implementation of optical communication systems and networking.

Optical Integrated Circuit Lab (M.Tech.)

The objective of the lab is to prepare students with a good foundation in optical communication field so that they become graduate and effective system engineers.

Electronics Workshop & PCB Lab

The objective of this lab is to prepare its students with good foundation in electronics field so that they become graduate and effective system engineers.

Network Analysis & Synthesis Lab

In Network Lab we analyze different electrical circuits using network theorems. The objective of the lab is to make the student familiar with the various network theorems and their applications on circuits. Students are further made familiar with two port network and transient & amp; frequency response of RLC circuits by plotting the responses practically. This gives students a better understanding of the problem as they can see the response of the circuit practically by performing on actual electrical circuit using CRO. This lab is very essential part of Electronics Engineering in which students are made familiar with the electrical connections, how they are made and practically how circuit gives response.

Control System Lab

This Lab & its experiments will help the students to acquire the skills associated with converting the paper-based into a practical system such as Familiarization with MATLAB control system toolbox, Determination of step response for first order and second order system with unity feedback on CRO & calculation of control system specification like Time constant, % peak overshoot. Settling time etc. from the response and also Determination of Root locus, Bode plot, Nyquist plot using MATLAB control system toolbox for 2nd order system & determination of different control system specification from the plot.

Advance PCB Lab

Advance PCB Lab is sponsored by AICTE under MODROB scheme. This lab is fully equipment with hardware & software tools. Single & double Sided PCB of Analog & Digital circuits can be designed in this Lab. In order to design Layout of complex circuits . Target-3001 software is available. A plated Thru-Hole facility is also available in order to make double sided PCB. A spin coater system is available to make a uniform & thin coating of chemicals on a glass epoxy sheet. A vacuum U.V exposure unit is available to make double sided PCB with proper resolution. A dry film laminator facility is also available which is helpful in double sided PCB designing. Along with above facilities, all the basic facility for PCB designing is available in this Lab. This Lab is useful for faculty, staff and students for their research work / higher study & completion of project work.

Microprocessor Lab

Microprocessor lab is catering to the needs of facilities in electronics field by training its students to make valuable contribution. This lab is used by B. tech second year students of different branches like Eletronics & Instrumentation , Computer Science etc and also used B.tech third year Electronics and Communication branch. The students undergo training on the programming and also interfacing different microprocessors and micro-controllers. The facilities in the lab are 8085, 8086, 8051 trainer kits.

Advance Integrated Circuit Lab

Advanced Integrated Circuits Lab has been set up with the objective of providing facilities required for simulation, analysis and design of a wide range of analog and digital circuits and systems so as to enable a designer/engineer meet the requirements of design and development of practical circuits and projects of a wide variety. This lab has been funded by AICTE under the MODROBS scheme. The lab is equipped with OrCAD Pspice simulation software and 2+16 channel Mixed Signal Oscilloscope so that accurate measurement and analysis of circuits becomes possible.

E-Yantra Lab

This lab is funded by MHRD and started by IIT Bombay. In this lab we give the basic idea for design a robot. After that we can introduce our own problem and design that. We have Atmel software for programming the AVR microcontroller. In this lab we have 7 Fire Bird V robots which are provided by IIT Bombay. And many other tools like zig-bee, dc motors etc. So this lab is very helpful for those students who have interest in Robotics.

Internet Lab

he Internet Lab is equipped with 16 personal computers having Internet facility ( LAN ) with 10 Mbps speed. The configuration of computer systems is 1 GB RAM with 120 GB hard disc and core 2 duo (2.40 GHz) processor. The lab provides internet facility for students and faculty members of the department.

Digital Signal Processing Lab

This lab consists of a software MATLAB. MATLAB is a high-level language and interactive environment that enables you to perform computationally intensive tasks faster than with traditional programming languages such as C, C++, and Fortran. We can use MATLAB in a wide range of applications, including signal and image processing, communications, control design, test and measurement , financial modeling and analysis, and computational biology . Add-on toolboxes (collections of special-purpose MATLAB functions) extend the MATLAB environment to solve particular classes of problems in these application areas.

Logic Design Lab/Digital Electronics Lab

Logic Design Lab/Digital Electronics Lab is catering to the needs of facilities in electronics field by training its students to make valuable contribution. This lab is used by B. tech second year students of different branches like Electronics & Communication, Eletronics & Instrumentation and Computer Science. Digital Electronics Laboratory is fully equipped with the required instruments such as C.R.O., Multimeters, signal Generator etc. to conduct experiments with digital ICs for UG students. It helps students to enhance their knowledge about various electronics equipments like shift registers, counters, adders, subtractors and seven segment display devices etc . The objective of this lab is to prepare its students with good foundation in electronics field so that they become graduate and effective system engineers.

Electronic Device Lab/ Electronics Circuit Lab

Electronics lab is catering to the needs of facilities in electronics field by training its students to make valuable contribution. This lab is used by B. tech students. It helps students to enhance their knowledge about various electronics equipment- both passive as well as active. Electronics is distinct from electrical and electro-mechanical science and technology, which deals with the generation, distribution, switching, storage and conversion of electrical energy to and from other energy forms using wires, motors, generators, batteries, switches, relays, transformers, resistors and other passive components. The objective of this lab is to prepare its students with good foundation in electronics field so that they become graduate and effective system engineers.

Communication Lab I/Communication Lab II

Communication Laboratory (Lab) is catering to the needs of facilities in communication field by training its students to make valuable contribution. This lab is used by B. Tech students of different branches like Electronics & Communication, Electronics & Instrumentation and Computer Science. This lab is equipped with Digital Storage Oscilloscopes, cathode-ray oscilloscope, Function generators & various kits for implementing and understanding Communication circuits/ techniques. It helps the students to enhance their knowledge about various Communication techniques like AM, FM, PM, DSB-SC, SSB-SC, PAM, PPM, PWM, PCM etc. All the experiments prescribed in & beyond the curriculum are performed. The objective of this lab is to prepare its students with good foundation in Communication field. Also, it provides adequate opportunities for Students / Research Scholar to learn and innovate in Communication field.

Integrated Circuits Lab

IC lab is catering to the needs of facilities in electronics field by training its students to make valuable contribution. This lab is used by B. tech students. It helps students to enhance their knowledge about various electronics equipments both passive as well as active. In analog integrated lab, designing of various filters, comparators, log antilog amplifiers and peak detector circuits is done using operational amplifier IC. This lab is very essential for students to learn theoretical concept by designing circuits practically. The objective of this lab is to prepare its students with good foundation in electronics field so that they become graduate and effective system engineers.

Project Lab

Electronics Project Lab contains all the parts and instructions to assemble educational and fun experiments and circuits. It is used by all students of electronics department whenever they are making the projects. Students build their own knowledge by exploring amplifiers, analogue and digital circuits plus learn how to read schematic diagrams. Build a special lighting effect, radio transmitter and receivers, amazing electronic sound effects, cool games and MORE! Hardware components in this Includes a built-in speaker, LED digital display, integrated circuits, transistors, transformers, diodes, resistors, capacitors, LEDs and lots of other components. A built-in breadboard allows easy wiring and connection of components. Students also make software based projects in which they have a good understanding of the concepts behind computer microprocessors and programming. Thus this lab gives the practical exposure to the students with real electronic world.

Center Of Robotics & Mechatronics

Robotics is the branch of electronics and communication, mechanical, electrical engineering and computer science that deals with the design, construction, operation, and application of robots, as well as computer systems for their control, sensory feedback, and information processing. These technologies deal with automated machines that can take the place of humans in dangerous environments or manufacturing processes, or resemble humans in appearance, behavior, and or cognition. Many of today's robots are inspired by nature contributing to the field of bio-inspired robotics. The concept of creating machines that can operate autonomously dates back to classical times, but research into the functionality and potential uses of robots did not grow substantially until the 20th century. Throughout history, it has been frequently assumed that robots will one day be able to mimic human behavior and manage tasks in a human-like fashion. Today, robotics is a rapidly growing field, as technological advances continue; researching, designing, and building new robots serve various practical purposes, whether domestically, commercially, or militarily. Many robots are built to do jobs that are hazardous to people such as defusing bombs, finding survivors in unstable ruins, and exploring mines and shipwrecks. So in our robotics lab we provide these robots on which we can do hand on practice and programmed them according to our need (i) Fire Bird V robot (ii) Fire Bird VI robot (iii) Fire Bird XII robot (iv) Humanoid (CONDO).

KIET-NI Labview Academy Lab

Labview is a graphical programming environment used by millions of engineers and scientists to develop sophisticated measurement, test and control systems. Labview can integrate with wide variety of hardware devices. It is possible to transfer the signal to be measured with the DAQ devices to the computer through a variety of bus structures. The student can learn process of measuring an analog signal and transfer the measurement to a computer for analysis, display or storage.

M.Tech. Simulation Lab

M.Tech Computer Simulation Lab provide the faculty members and M.Tech, B.Tech students, a platform to enhance their knowledge. In this lab we have many Software designing tools for research and development as well as for projects of M.Tech and B.Tech students. This lab is used by M.Tech (first year and second year) and B.Tech (third year and final year) of Electronics & Communication Engg. In this lab we have TANNER ( Electronic Design Automation(EDA) for VLSI Design ) , IE3D SUPER STRUCTURE DESIGNER (IE3D Simulation is used to simulate various RF/Microwave Circuits ) , QUALNET (Simulation of Link Design of Satellite Communication, Mobile Network , Computer Network System & Sensor Network) , Logic Analyzer instrument (Data analysis of operations of digital hardware circuits ) and Spectrum Analyzer (Spectrum analyzer is ideal for installation and maintenance, spectrum monitoring). The objective of this lab is to enhance the knowledge and development of faculty members as well as of students in the field of research and development of Electronics & Communication Engineering.

Electronics Circuit Design Lab

In this practical course students will carry out a design oriented project work using various analog/ digital building blocks which they have already studied in their analog electronic/digital electronic courses such as Electronic circuits, integrated circuits and filter design. Students will use TARGET 3001 software for the purpose of designing which represents a new generation of CAD/CAE software for circuit design. TARGET 3001! incorporates the functions of schematic capture, simulation, PCB layout, autoplacer, autorouter, 3D-view, EMC analysis and frontpanel engraving all through one Windows user interface. The integration of the entire project data in one common database accelerates the development process enormously. So in this lab those students who are making the projects can implement their projects with the help of this software and can see the output before hardware implementation. So this lab is very useful for giving the knowledge of making projects.

CAD of Electronics Lab

This lab provides basic and advanced facilities for UG and PG coursework related experiments, project work and research facilities in the area of device modeling, simulation and various aspects of front end VLSI design flow. This lab can be used by B. Tech. and M. Tech. students to enhance their skill and improvement in for FPGA implementation of module. The objective of the lab is to prepare student with device modeling,simulation, synthesis, and FPGA implementation of module with VHDL and PSpice tools.

© KIET-Ghaziabad, All rights reserved	DEVELOPED BY:-SHIVAM GUPTA & SUNNY PANDEY