| 1 |
Wear and enhancement of wear resistance – A review |
Neha Bhadauria, Sunil Pandey, P.M.Pandey |
Mechanical Engineering |
Materials today: Proceedings |
2019-20 |
2214-7853 |
https://www.sciencedirect.com/journal/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785320313717#:~:text=The%20results%20suggested%20increase%20of,the%20particle%20content%20%5B8%5D. |
Scopus |
| 2 |
Improving surface hardness of aluminum 6063 alloy using hardfacing |
Shivank A.Tyagi, Neha Bhadauria, Prashant Vashishtha, Smriti Mishra |
Mechanical Engineering |
Materials today: Proceedings |
2019-20 |
2214-7853 |
https://www.sciencedirect.com/journal/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785320310257?via%3Dihub |
Scopus |
| 3 |
Electrical Discharge Machining (EDM) of nickel-based nimonic alloys: A review |
Piyush Pant, Pushpendra S. Bharti |
Mechanical Engineering |
Materials Today: Proceedings |
2019-20 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S221478531933250X |
Scopus |
| 4 |
Influence of fillers and welding processes on the microstructural evolution, mechanical properties and corrosion behavior of dissimilar Hastelloy C-22/AISI 321 joints |
Sumitra Sharma, Ravindra V Taiwade, Abhishek Yadav, Himanshu Vashishtha |
Mechanical Engineering |
Materials Research Express |
2019-20 |
2053-1591 |
https://iopscience.iop.org/journal/2053-1591 |
https://iopscience.iop.org/article/10.1088/2053-1591/ab316b/meta |
SCI Impact Factor 1.929 |
| 5 |
Insight in applications, manufacturing and corrosion behaviour of magnesium and its alloys – A review |
Rupesh Chalisgaonkar |
Mechanical Engineering |
Materials today: Proceedings |
2019-20 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.semanticscholar.org/paper/Insight-in-applications%2C-manufacturing-and-of-and-%E2%80%93-Chalisgaonkar/852341d7994248fdbca2135edefd3e196e26a046 |
Scopus |
| 6 |
Performance assessment of Dual Fuel Engine operated with agricultural waste and Diesel |
S Bhardwaj, A Sharma, A Malik, K L A Khan |
Mechanical Engineering |
Lecture notes in mechanical engineering |
2019-20 |
2195-4356 |
https://link.springer.com |
https://link.springer.com/chapter/10.1007/978-981-15-3746-2_21 |
SCOPUS |
| 7 |
Prediction of machining characteristics of finish cut WEDM process for pure titanium using feed forward back propagation neural network |
Rupesh Chalisgaonkar, Jatinder Kumar, Piyush Pant |
Mechanical Engineering |
Materials Today: Proceedings |
2019-20 |
2214-7853 |
https://www.journals.elsevier.com/materials-today-proceedings |
https://www.sciencedirect.com/science/article/pii/S2214785319324393 |
Scopus |
| 8 |
The process variation control in punching process by using dmaic approach for achieving six sigma level |
Dr. Anurag Gupta |
Mechanical Engineering |
INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS |
2018-19 |
2320-2882 |
Journal IJCRT( ISSN: 2320-2882 ) International Peer Reviewed Journal and Refereed Journal, Follow ugc approved journal, UGC CARE, |
http://ijcrt.org/papers/IJCRT1812518.pdf |
listed in UGC approved journal
at the time of publication |
| 9 |
Analysis of Graphite reinforced Aluminium-6061 Metal Matrix Composite using Stir Casting Method |
Archana Kumari, Pratibha kumari |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_31.pdf |
UGC |
| 10 |
Analysis of load cell |
R Kumar, S Chhabra, AS Verma, A Gupta |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
Research India Publications was established in 1998 and now today we are one of the leading International Publishers (ripublication.com) |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_48.pdf |
listed in UGC approved journal
at the time of publication |
| 11 |
Bio-Diesel-An Alternate source of future |
Ashok kumar,Ajay Tyagi,Vineet Kumar Vashishtha |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_52.pdf |
listed in UGC approved journal
at the time of publication |
| 12 |
Carbonaceous Phase Change Nanocomposites: A low cost energy storage approach |
Apurv Yadav, Vineet Kumar Vashishtha, Harsha Yadav |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_33.pdf |
listed in UGC approved journal
at the time of publication |
| 13 |
Characterisation of Al6063/Alumina Nano Composite |
Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
International Journal for Research in Engineering Application & Management |
2018-19 |
2454-9150 |
https://www.ijream.org/ |
http://ijream.org/papers/IJREAMV04I033926.pdf |
UGC Care List |
| 14 |
Characterization of Jute and carbon fiber Hybrid FRP composite |
Dr. Anurag Gupta |
Mechanical Engineering |
International Journal of Technical Innovation in Modern Engineering & Science |
2018-19 |
2455-2585 |
http://ijtimes.com/ |
http://ijtimes.com/papers/finished_papers/150508010626.pdf |
listed in UGC approved journal
at the time of publication |
| 15 |
Comparative Investigation of Exhaust Emissions of Variable Compression Ratio Engine Utilizing Blends of Linseed Oil Biodiesels, Isopropyl Alcohol, Diethyl Ether with Standard Diesel |
Ajay Singh Verma; MM Hasan, Ashish Karnwal |
Mechanical Engineering |
World Scientific News |
2018-19 |
2392-2192 |
http://www.worldscientificnews.com/ |
http://www.worldscientificnews.com/wp-content/uploads/2018/09/WSN-113-2018-247-259-1.pdf |
Peer Reviewed |
| 16 |
Design of Upright Assembly for SUPRA Vehicle |
Ashish Kumar Singh, Tuhin Srivastava |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_58.pdf |
UGC |
| 17 |
Developing Thermal Model for Single Basin Double Slope Solar Desalination System |
Sandeep Chhabra, Ranjeet Kumar, Anurag Gupta, Ajay Singh Verma |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_55.pdf |
UGC |
| 18 |
Development of Mathematical Models for Bead Geometry of Al6061 surfaced using GTAW |
Prashant Vashishtha, Neha Bhadauria |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
IJAER, International Journal of Applied Engineering Research, Engineering Journals, Engineering Research Journal publisher in India, Mechanical Journals in India, Science Journal Publishers in India (ripublication.com) |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_41.pdf |
UGC Care List |
| 19 |
DIAGONOSIS OF REMAINING USEFUL LIFE ESTIMATION OF BALL BEARING USING ARTIFICIAL NEURAL NETWORK |
Kuldeep Singh, Somesh Agrawal, Piyush Pant |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
http://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_10.pdf |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_10.pdf |
UGC |
| 20 |
Effect of Natural Fibers as Fillers on Glass Fiber Reinforced Plastics |
Dr. Anurag Gupta |
Mechanical Engineering |
International Journal of Research in Advent Technology |
2018-19 |
2321-9637 |
IJRAT - International Journal of Research in Advent Technology |
https://1library.net/document/qvvl3grq-effect-natural-fibers-fillers-glass-fiber-reinforced-plastics.html |
listed in UGC approved journal
at the time of publication |
| 21 |
ENHANCING SUPPLY CHAIN OF HUMANITARIAN SUPPLY CHAIN MANAGEMENT - A Case study |
Somesh Agrawal, Kuldeep Singh |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_17.pdf |
UGC |
| 22 |
Execution of Reverse engineering- an ecologically responsive attitude smeared in OEM plants-Case Study |
Neeraj Kumar, Vipin |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_18.pdf |
UGC |
| 23 |
Experimental Investigation of temperature in Fins |
Sharma Subodh, Kumar Ajay, Kumari Pratibha |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_63.pdf |
UGC |
| 24 |
Experimental Wear behaviour of FeCrMoW hard faced coating
|
Kumari P., Kumari A., Sharma S. K. |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_32.pdf |
UGC |
| 25 |
Modeling of Elastic Properties of Particulate Composites |
A. Kumar, S. K. Singh, S. Sharma, A. Chandra |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-9769 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_46.pdf |
UGC |
| 26 |
Multi-Response Optimization of The Mechanical Properties of Pultruded Glass Fiber Composite Using Optimized Hybrid Filler Composition by The Gray Relation Grade analysis |
Anurag Gupta, Rahul Vaishya, K L A Khan, R S Walia and Hari Singh |
Mechanical Engineering |
Materials Research Express |
2018-19 |
2053-1591 |
Materials Research Express - IOPscience |
https://iopscience.iop.org/article/10.1088/2053-1591/ab56f2 |
SCIE |
| 27 |
Numerical Analysis of different blade profile of wind turbine |
Gaurav, Vipin, Raja Ram, Neeraj Kumar |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_67.pdf |
UGC |
| 28 |
OEE Enhancement Using TPM in Light Machine Shop: A case study |
Arunesh Chandra, Ajay Kumar, Yatender Chaturvedi |
Mechanical Engineering |
IJAER |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_34.pdf |
UGC |
| 29 |
Optimization of delamination factor in drilling of carbon fiber filled compression molded GFRP composite |
Anurag Gupta, Ajay Singh Verma, Sandeep Chhabra, Ranjeet Kumar |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_43.pdf |
UGC |
| 30 |
Optimization of Machining Parameters for Turning of ASTM A387 Alloy Steel on CNC Lathe Machine |
Dr. Anurag Gupta |
Mechanical Engineering |
International Journal of Technical Innovation in Modern Engineering & Science |
2018-19 |
2455-2585 |
http://ijtimes.com/ |
http://ijtimes.com/papers/finished_papers/150510224858.pdf |
listed in UGC approved journal
at the time of publication |
| 31 |
Optimization of parameters of GTAW for surfacing of AISI 304 |
Neha Bhadauria, Prashant Vashishtha, Smriti Mishra |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_40.pdf |
UGC Care List |
| 32 |
Performance characteristics of CI Engine fuelled Diethyl - Ether and its comparison with diesel fuelled CI engine |
Abhishek Yadav , Shwetabh Singh, Shivshankar Singh, Shubham Bishnoi, Tarun Goyal, Shashank Pandey
|
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_64.pdf |
UGC |
| 33 |
Reliability And Availability Analysis For A Manufacturing Network By Using Active Redundancy |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_19.pdf |
UGC Care List |
| 34 |
Study of the Recent Catalysts Utilized In Biofuels Production |
Ajay Singh Verma, Anurag Gupta, Ranjit Kumar, Sandeep Chhabra |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_54.pdf |
UGC |
| 35 |
Surface Hardness Enhancement of Al5083 Using TIG ARC |
Prashant Vashishtha, Neha Bhadauria |
Mechanical Engineering |
International Journal for Research in Engineering Application & Management |
2018-19 |
2454-9150 |
https://www.ijream.org/ |
http://ijream.org/papers/IJREAMV04I033924.pdf |
UGC Care List |
| 36 |
Thermal Analysis of Double Pipe Heat Exchanger |
Ashish Sharma, Ajay Tyagi, Ashok Kumar |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_53.pdf |
UGC |
| 37 |
Waste reduction by the assessment of reverse engineering attitude in gear production unit |
Neeraj Kumar, Anurag Bhargav |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_15.pdf |
UGC |
| 38 |
Wear Behaviour of FeCrMoW Hardfaced Coating |
Kumari Archana and Subodh Sharma Pratibha Kumari |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2018-19 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_32.pdf |
UGC |
| 39 |
Design & Fabrication of pneumatic powdered hacksaw |
Rupesh Chalisgaonkar, Ashutosh kumar Yadav, Abhishek Tyagi, , Ankur Jaiswal, Sandeep Kumar Singh |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_29.pdf |
UGC |
| 40 |
Effect of age Hardening and quenching media on Aluminium Foams |
K. L. A. Khan, G Kumar, R Prasad |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-9769 |
https://www.ripublication.com |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_42.pdf |
UGC |
| 41 |
Effect of Process Parameters on MRR and Surface Roughness in Turning Operation using Taguchi Method |
Piyush Pant, Kunwar Laiq Ahmad Khan, Rupesh Chalisgaonkar and Shobhit Gupta |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-4562 |
https://www.ripublication.com/ijaer.htm |
http://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_47.pdf |
UGC |
| 42 |
Experimental Investigation on Machining Characteristics of EN19 Alloy Steel Using CNC Vertical Machining Center |
Rupesh Chalisgaonkar, Ayush Rastogi |
Mechanical Engineering |
Journal of Experimental & Applied Mechanics |
2017-18 |
2321–516X |
http://stmjournals.com/Journal-of-Experimental-and-Applied-Mechanics.html |
http://engineeringjournals.stmjournals.in/index.php/JoEAM/article/view/1695 |
Peer Reviewed |
| 43 |
Impact of Loading and unloading strategy on Performance of a FMS at different level of routing flexibility |
Md. Mushid, A Rajvanshi, K.L.A.Khan |
Mechanical Engineering |
International Journal of Applied Engineering Research |
2017-18 |
0973-9769 |
https://www.ripublication.com |
https://www.ripublication.com/ijaerspl2018/ijaerv13n6spl_36.pdf |
UGC |
| 44 |
Design and analysis of plastic moulding die and runner shape optimisation using AHP method. |
Rajesh Kumar Patel |
Mechanical Engineering |
International Journal of Advance Research in Engineering, Science & Technology |
2016-17 |
2350-0328 |
http://www.ijarset.com/ |
http://www.ijarest.com/papers/finished_papers/150723092255.pdf |
UGC |
| 45 |
Multi-response optimization using grey-fuzzy methodology for pure titanium in finish cut WEDM |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
International Journal of Advanced Mechatronics and Robotics |
2016-17 |
0975-6108 |
https://serialsjournals.com/index.php?route=product/product&product_id=330 |
https://pe.gndec.ac.in/sites/default/files/15-Rupesh%20Chalisgaonkar.pdf |
Peer Reviewed |
| 46 |
Nano-hierarchical Hydrophobic Structure of Polycarboante Fumed Silica Composites as a Thermal Barrier |
Neha Katiyar, Neha Bhadauria |
Mechanical Engineering |
International Journal of Engineering, Technology, Science and Research |
2016-17 |
2394-3386 |
http://www.ijetsr.com/ |
http://www.ijetsr.com/images/short_pdf/1471706792_IFUNA322_ijetsr.pdf |
Not listed in UGC |
| 47 |
Optimization of tensile strength of pultruded glass fiber composite |
Anurag Gupta,R.S walia, Hari singh |
Mechanical Engineering |
international journal of advance research in science and engineering |
2016-17 |
2319-8354 |
www.ijarse.com |
https://www.ijarse.com/images/fullpdf/1453103251_168I.pdf |
listed in UGC approved journal
at the time of publication |
| 48 |
Simultaneous Optimization of Multiple Performance Characteristics for Pure Titanium using multi-response signal-tonoise (MRSN) ratio in WEDM process |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
International Journal of Scientific & Engineering Research |
2016-17 |
2229-5518 |
https://www.ijser.org/ |
https://www.ijser.org/researchpaper/Simultaneous-Optimization-of-Multiple-Performance-Characteristics-for-Pure-Titanium-Using-multi-response-signal-to-noise-MRSN-ratio-in-WEDM-process.pdf |
Peer Reviewed |
| 49 |
The Effect of Variable Compression Ratio on Performance and Emission Characteristics of Diesel Engine Fuelled With Blends of Diethyl Ether, Linseed Oil Biodiesel and Diesel |
Ajay Singh Verma; MM Hasan, Ashish Karnwal, Vipul Vibhanshu |
Mechanical Engineering |
SAE Technical Paper |
2015-16 |
1487191 |
https://www.sae.org/publications/technical-papers/content/2015-24-2486/ |
https://www.sae.org/publications/technical-papers/content/2015-01-1936/ |
SCOPUS |
| 50 |
Experimental Investigation of Combustion and Exhaust Emission Characteristics of a Variable Compression Ratio Engine Using Isopropyl Alcohol (2-Propanol)-Diethyl Ether Blend with Diesel |
Ajay Singh Verma; MM Hasan, Ashish Karnwal, Vipul Vibhanshu |
Mechanical Engineering |
SAE Technical Paper |
2015-16 |
1487191 |
https://www.sae.org/publications/technical-papers/content/2015-01-1936/ |
https://www.sae.org/publications/technical-papers/content/2015-24-2486/ |
|
| 51 |
Implementation of Virtual Reality in the Conceptual Design of a Tractor Trailer |
A. Chandra, P. Chandna |
Mechanical Engineering |
Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering |
2015-16 |
2517-9950 |
https://panel.waset.org/journal/Mechanical |
https://www.researchgate.net/publication/271520786_Implementation_of_Virtual_Reality_in_the_Conceptual_Design_of_a_Tractor_Trailer |
UGC |
| 52 |
Investigation of the machining parameters and integrity of the work and wire surfaces after finish cut WEDM of commercially pure titanium |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
Journal of the Brazilian Society of Mechanical Sciences and Engineering |
2015-16 |
1806-3691 |
https://www.springer.com/journal/40430/ |
https://link.springer.com/article/10.1007%2Fs40430-015-0335-3 |
SCI |
| 53 |
Investigation of wire consumption and wear mechanism in trim cut WEDM operation of commercially pure titanium |
Rupesh Chalisgaonkar, Jatinder Kumar |
Mechanical Engineering |
Materials Science Forum |
2015-16 |
1662-9752 |
https://www.scientific.net/MSF |
https://www.scientific.net/MSF.808.43 |
Scopus |
| 54 |
Stature Prediction Model Based on Hand Anthropometry |
A. Chandra, P. Chandna, S. Deswal, R. Mishra, R. Kumar |
Mechanical Engineering |
International Journal of Medical, Health, Biomedical and Pharmaceutical Engineering |
2015-16 |
10001129 |
https://panel.waset.org/journal/Medical |
https://www.researchgate.net/publication/275897094_Stature_Prediction_Model_Based_On_Hand_Anthropometry |
UGC |
| 55 |
Study on application of waste plastic in the construction industry |
Abhishek Yadav, Arunesh Chandra, Shwetabh singh |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.743 |
https://drive.google.com/file/d/1MVJh_vw1Tcz8-xtMaBrapGRAPir1j8wq/view?usp=sharing |
Scopus |
| 56 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://www.sciencedirect.com/science/article/pii/S2214785322029480 |
|
| 57 |
Study of utilization of hydrogen as fuel in internal combustion engine |
Aman Aggarwal, Suyash Yadav, Kshitij Singh, Ajay Singh Verma, Sandeep Chhabra |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://doi.org/10.1016/j.matpr.2022.03.660 |
https://www.sciencedirect.com/science/article/pii/S2214785322020089 |
|
| 58 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta,Rahul Vaishya,Ranjeet Kumar, K.L.A.Khan,Sandeep Chhabra,Ajay Singh Verma,Abhay Bharadwa |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
22147853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://www.sciencedirect.com/science/article/pii/S2214785322022519 |
|
| 59 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta,
Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, SandeepChhabra, jay Singh Verma, Abhay
Bha |
Mechanical Engineering |
MaterialsToday: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 60 |
Characterization of wear of FRP composites: A review |
PrathuSingh,SalilSingh, Rudresh Ojha,Pratik Tiwari, Shahib Khan,Ranjeet Kumar, Anurag Gupta |
Mechanical Engineering |
MaterialsToday: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.236 |
https://drive.google.com/file/d/1vpYp8c6lYZAFzkIFWB8cLQyyEt8b21cP/view?usp=sharing |
SCOPUS |
| 61 |
A review of fatigue behavior of FRP composites |
Shrey Arora, Rupesh Chitkara,Ayush Singh, Dhangar Divyanshu Dubey, Ranjeet Kumar, AnuragGupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.034 |
https://drive.google.com/file/d/13FWIpS9P8EyduqLUAbJxJTYCzYSO90sj/view?usp=sharing |
SCOPUS |
| 62 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
RanjeetKumar, Anurag Gupta, K.L.A.Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
https://drive.google.com/file/d/1c2v3XluDU0wQBu2hi9T1LoMR718FfONF/view?usp=sharing |
SCOPUS |
| 63 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, SandeepChhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/1x89j8gOWkROradYo6yn3KHjemTpFtNgE/view?usp=sharing |
SCOPUS |
| 64 |
Parametric optimization of traveling wire electrochemical discharge machining (TW-ECDM) process for aspect ratio during machining of borosilicate glass |
ManojKumar,R.O.Vaishya, N.M.Suri,Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
1210-1214 |
https://doi.org/10.1016/j.matpr.2022.03.599 |
https://drive.google.com/file/d/1NB1AjjOv6E_Wnw0iS-ZGmAKQWeD0qGdC/view?usp=sharing |
SCOPUS |
| 65 |
Bioinspired hydrophobic surfaces: An overview |
Navdeep Singh Bains,Rahul O.Vaishya, Suman Kant, Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.901 |
https://drive.google.com/file/d/1UX2MStHkvRsr6XzRU7SJpasVRddvx7y_/view?usp=sharing |
SCOPUS |
| 66 |
A review on performance, combustion and emissions utilizing
alternative fuels |
Ajay Singh Verma , Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/10UeqLwRxZIgxGn-ebWFVlhwghwgGaLfh/view?usp=sharing |
Scopus |
| 67 |
A review on performance, combustion and emissions utilizing
alternative fuels |
Ajay Singh Verma , Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/10UeqLwRxZIgxGn-ebWFVlhwghwgGaLfh/view?usp=sharing |
Scopus |
| 68 |
A review of the performance and effluent characteristics of diesel engine
fueled with different biodiesel |
Akhil Malik, Abhishikt Sinha , Akshat Bhardwaj, Chirag Chauhan, Akash Yadav, Ashish Karnwal, Ashish |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7854 |
https://doi.org/10.1016/j.matpr.2022.04.204 |
https://drive.google.com/file/d/1N7VXCMZamyJEH-k3Zhq6EVFkOYsa5VyI/view?usp=sharing |
Scopus |
| 69 |
Attempts to raise the solar still outcome: A short review |
Sandeep Chhabra , Ajay Singh Verma , Anurag Gupta , Ranjeet Kumar , Ashish Karnwal , Ashok Kumar , V |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7855 |
https://doi.org/10.1016/j.matpr.2022.04.477 |
https://drive.google.com/file/d/1-6kniPo8cSGRt2TOHcR_iN5NwT_D7MeF/view?usp=sharing |
Scopus |
| 70 |
A short review of the effect of plunge depth on friction stir welding of aluminium pipes |
Ashish Sharma, Zahid A Khan, Arshad Noor Siddiquee |
Mechanical Engineering |
MATERIALSTODAYPROCEEDINGS |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.05.257 |
https://drive.google.com/file/d/1NHLrNetluCne76lpYhcbUSIffq_xdqCW/view?usp=sharing |
SCOPUS |
| 71 |
Review of various methods of keyhole removal in friction stir welding sheets and pipes |
Ashish Sharma, Zahid A Khan, Arshad Noor Siddiquee |
Mechanical Engineering |
MATERIALSTODAYPROCEEDINGS |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.883 |
https://drive.google.com/file/d/1TO-oULl5uUq3Z8EtJJVDH0pP2_LeFlML/view?usp=sharing |
SCOPUS |
| 72 |
An overview of software tools for the photovoltaic industry |
Vineet Kumar Vashishtha,, Apurv Yadav,, Ashok Kumar, Vinod Kumar Shukla |
Mechanical Engineering |
Materials Today Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.737 |
https://drive.google.com/drive/folders/1btrUCUbOai3dB51cdu6RINoUltP7e5fS?usp=sharing |
SCOPUS |
| 73 |
Feasibility study of vertical axis wind turbine on UAE highways |
Apurv Yadav, Swaroop Ramaswamy Pillai, Vineet Kumar Vashishtha, Ashok Kumar |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.523 |
https://drive.google.com/drive/folders/1btrUCUbOai3dB51cdu6RINoUltP7e5fS?usp=sharing |
SCOPUS |
| 74 |
Recrystallisation, concurrent precipitation, and texture
development in Cold Forged Mg-6Al-3Sn magnesium alloy, |
Gaurav, Purnashis Chakraboraty;Vikrant Tiwari |
Mechanical Engineering |
Canadian Metallurgical Quarterly; |
2022-23 |
Print ISSN: 0008-4433 Online ISSN: 1879-1395 |
Not issued |
https://drive.google.com/file/d/1_qAtMSV5er4FP-yX6yB-BmKFD7oBGmjW/view?usp=sharing |
SCI |
| 75 |
Variants of TIG welding process for improvement of weld penetration
depth - A review |
Gaurav Sharma, Rohan Tyagi, Priyanshu, Pratishtha Sharma |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322024087 |
https://drive.google.com/file/d/1646pSZe5Slk0z0t9jboshm--LrBrr0NM/view?usp=sharing |
Scopus |
| 76 |
Recent development in the field of wind turbine |
Vidit Sharma, Sonendra Sharma, Gaurav Sharma |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322037798 |
https://drive.google.com/file/d/1Ll3jz8KnzGUySBSntp3udLwtUIu5oF-a/view?usp=sharing |
Scopus |
| 77 |
Machine Learning Regression Approaches for Prediction Microhardness of Al-Y2O3 Composite |
Sachin Rathore, Ratnesh Kumar Raj Singh, K.L.A. Khan |
Mechanical Engineering |
International Journal of Engineering Trends and Technology Volume 70 Issue 4, 303-315, April 2022 |
2021-22 |
ISSN: 2231 – 5381 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
https://drive.google.com/file/d/1n5O24O7quqp3CpoABpz6TDxKjLyR6VfZ/view?usp=sharing |
SCOPUS |
| 78 |
Modelling of Indian vendors posture using rapid upper limb assessment (RULA) |
S. Rathore, K.L.A. Khan, A.P. Agrawal, R. Chalisgaonkar, |
Mechanical Engineering |
Materials Today Proceedings (Elsevier) |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.712 |
https://drive.google.com/file/d/1WC3U4ofeXlywjNdUZAQm6bLdTJBhLGR4/view?usp=sharing |
SCOPUS |
| 79 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, SandeepChhabraAjay Singh Verma, AbhayBhara |
Mechanical Engineering |
MaterialsToday: Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 80 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
Ranjeet Kumar Anurag Gupta K.L.A.Khan, |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
https://drive.google.com/file/d/1gRW69MGr35Ty0IeQZFrXvk3Sen7XnBPg/view?usp=sharing |
SCOPUS |
| 81 |
Multi response assessment of EN19 alloy steel in CNC milling process using Fuzzy matter element methodology |
R. Chalisgaonkar, V. Agrawal, S. Rathore and K.L.A. Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.713 |
https://drive.google.com/file/d/1J088CMjTf8SrUgpeg_o7ogFG_NyZKlyn/view?usp=sharing |
SCOPUS |
| 82 |
A concept for removing the pollutants from air |
D. Deepak Singh, A. Mohan, A. Walia, D. Choudhary and K L A Khan |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2022-23 |
2214-7853 |
https://drive.google.com/file/d/1h_Nq0VhdJruvGfM18dLHJ8zf9khybTyg/view?usp=sharing |
https://drive.google.com/file/d/1h_Nq0VhdJruvGfM18dLHJ8zf9khybTyg/view?usp=sharing |
SCOPUS |
| 83 |
Review of bio-fuel and nano-particles as an additive in diesel fuelled engine |
Govind Sharma, Subodh Kumar Sharma, KV Ojha |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.307 |
https://drive.google.com/file/d/1qnPZN54_kM8RBtV7K-QaXLh3VwzEbS4P/view?usp=sharing |
|
| 84 |
Modelling of gas field formation in atomization casting |
KrishnaVijay Ojha, SubodhKumar Sharma,Neeraj Kumar, PratibhaKumari, Kumari, Archana |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.05.458 |
https://drive.google.com/file/d/18J1s51n0PESm3U5UIjqnQdyVgeeq3qUL/view?usp=sharing |
|
| 85 |
Analysis of supply chain: An application of Taguchi method |
V.K.Pathak R.K.Patel N.Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
|
|
|
|
| 86 |
Modelling of gas field formation in atomization casting |
Krishna Vijay Ojha, Subodh Kumar Sharma, Neeraj Kumar, Pratibha Kumari, Kumari Archana |
Mechanical Engineering |
materials today proceeding |
2021-22 |
|
|
|
|
| 87 |
Fabrication of aluminium MMCs & associated difficulties–A review |
Neha Bhadauria, Prashant Vashishtha, Smriti Mishra, Prashant Bhardwaj |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022465 |
https://drive.google.com/file/d/1yMsNew3xcRy4kuhGbud-fNnMGsSm3CtM/view?usp=sharing |
Scopus |
| 88 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322027419 |
https://drive.google.com/file/d/1ixCSWb0T2yh8B0vsEZfe7tGhTWNRJaK0/view?usp=sharing |
Scopus |
| 89 |
Problems encountered in underwater welding and remedies- a review |
Prashant Vashishtha, Reeta Wattal, Sunil Pandey, Neha Bhadauria |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S221478532202795X |
https://drive.google.com/file/d/1b1L-__xiOzg_ESfoVshDUVhKPtrojT93/view?usp=sharing |
Scopus |
| 90 |
Fabrication of aluminium MMCs & associated difficulties–A review |
Neha Bhadauria, Prashant Vashishtha, Smriti Mishra, Prashant Bhardwaj |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322022465 |
https://drive.google.com/file/d/1yMsNew3xcRy4kuhGbud-fNnMGsSm3CtM/view?usp=sharing |
Scopus |
| 91 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S2214785322027419 |
https://drive.google.com/file/d/1ixCSWb0T2yh8B0vsEZfe7tGhTWNRJaK0/view?usp=sharing |
Scopus |
| 92 |
Problems encountered in underwater welding and remedies- a review |
Prashant Vashishtha, Reeta Wattal, Sunil Pandey, Neha Bhadauria |
Mechanical Engineering |
Materials Today: Proceedings |
2021-22 |
2214-7853 |
https://www.sciencedirect.com/science/article/pii/S221478532202795X |
https://drive.google.com/file/d/1b1L-__xiOzg_ESfoVshDUVhKPtrojT93/view?usp=sharing |
Scopus |
| 93 |
Analysis of supply chain: An application of Taguchi method |
V.K.Pathak, R.K.Patel, N.Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
|
|
|
|
| 94 |
Effect on the mechanical properties due to hybridization of banana-fiber composites: A review |
Ranjeet Kumar, Anurag Gupta, K.L.A.Khan |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.436 |
https://drive.google.com/file/d/1c2v3XluDU0wQBu2hi9T1LoMR718FfONF/view?usp=sharing |
SCOPUS |
| 95 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta, Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, Sandeep Chhabra, Ajay Singh Verma, Abhay Bha |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 96 |
Characterization of wear of FRP composites: A review |
Prathu Singh,Salil Singh, Rudresh Ojha, Pratik Tiwari, Shahib Khan, Ranjeet Kumar, Anurag Gupta |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.236 |
https://drive.google.com/file/d/1vpYp8c6lYZAFzkIFWB8cLQyyEt8b21cP/view?usp=sharing |
SCOPUS |
| 97 |
A review of fatigue behavior of FRP composites |
Shrey Arora, Rupesh Chitkara, Ayush Singh, Dhangar Divyanshu Dubey, Ranjeet Kumar, Anurag Gupta |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.034 |
https://drive.google.com/file/d/13FWIpS9P8EyduqLUAbJxJTYCzYSO90sj/view?usp=sharing |
SCOPUS |
| 98 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/1x89j8gOWkROradYo6yn3KHjemTpFtNgE/view?usp=sharing |
SCOPUS |
| 99 |
Investigation of different parameters of cube printed using PLA by FDM 3D printer |
Shreesh Maurya,Bharatveer Malik, Praduman Sharma,Ajay Singh, Rupesh Chalisgaonkar |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.700 |
https://drive.google.com/file/d/1nDKItlfy0-oXWb2FE7d3FIWa3pZDrCl3/view?usp=sharing |
SCOPUS |
| 100 |
Modelling of Indian vendors posture using rapid upper limb assessment (RULA) |
SachinRathore, K.L.A.Khan, Anant Prakash Agrawal, Rupesh Chalisgaonkar, Ratnesh Kr.Raj Singh, Malay |
Mechanical Engineering |
Materials Today Proceedings |
2022-23 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.712 |
https://drive.google.com/file/d/1Wma3cUyv0bEVnULz__QLMPu2TZohU_ad/view?usp=sharing |
SCOPUS |
| 101 |
Machine Learning Regression Approaches for Prediction Microhardness of Al-Y2O3 Composite |
Sachin Rathore, Ratnesh Kumar Raj Singh, K.L.A. Khan |
Mechanical Engineering |
International Journal of Engineering Trends and Technology Volume 70 Issue 4, 303-315, April 2022 |
2021-22 |
ISSN: 2231 – 5381 |
https://doi.org/10.14445/22315381/IJETT-V70I4P227 |
https://drive.google.com/file/d/1n5O24O7quqp3CpoABpz6TDxKjLyR6VfZ/view?usp=sharing |
SCOPUS |
| 102 |
Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite |
Anurag Gupta,
Rahul Vaishya, Ranjeet Kumar, K.L.A.Khan, SandeepChhabra, jay Singh Verma, Abhay
Bha |
Mechanical Engineering |
MaterialsToday: Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.110 |
https://drive.google.com/file/d/1_8a8aLiQORil7xDWhdU_NM_59AFM9yT0/view?usp=sharing |
SCOPUS |
| 103 |
A review on performance, combustion and emissions utilizing alternative fuels |
Ajay Singh Verma, Sandeep Chhabra, Ashish Karnwal, Anurag Gupta, Ranjeet Kumar |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.04.777 |
https://drive.google.com/file/d/1x89j8gOWkROradYo6yn3KHjemTpFtNgE/view?usp=sharing |
SCOPUS |
| 104 |
Parametric optimization of traveling wire electrochemical discharge machining (TW-ECDM) process for aspect ratio during machining of borosilicate glass |
ManojKumar,R.O.Vaishya, N.M.Suri,Anurag Gupta |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
1210-1214 |
https://doi.org/10.1016/j.matpr.2022.03.599 |
https://drive.google.com/file/d/1NB1AjjOv6E_Wnw0iS-ZGmAKQWeD0qGdC/view?usp=sharing |
SCOPUS |
| 105 |
Study of utilization of hydrogen as fuel in internal combustion engine |
Aman Aggarwal, Suyash Yadav, Kshitij Singh, Ajay Singh Verma, Sandeep Chhabra |
Mechanical Engineering |
MaterialsToday:
Proceedings |
2021-22 |
2214-7853 |
https://doi.org/10.1016/j.matpr.2022.03.660 |
https://drive.google.com/file/d/19mYtxbJvgGuG3--lk7uhwPGwFZ8Gq1sW/view?usp=sharing |
SCOPUS |
| 106 |
Influence of process parameters of friction stir processing on the fabrication of metal foam |
Smriti Mishra, Prashant Bhardwaj, Neha Bhadauria, Prashant Vashishtha |
Mechanical Engineering |
Materials today proceedings |
2021-22 |
2214-7853 |
Influence of process parameters of friction stir processing on the fabrication of metal foam - ScienceDirect |
Influence of process parameters of friction stir processing on the fabrication of metal foam - ScienceDirect |
scopus |
| 107 |
Fabrication Of Aluminium MMCs & assosiated difficulties-A Review |
Neha Bhadauria, Prashant Vashishtha,Smriti Mishra, Prashant Bhardwaj, |
Mechanical Engineering |
Materials today proceedings |
2021-22 |
2214-7853 |
Fabrication of aluminium MMCs & associated difficulties – A review - ScienceDirect |
Fabrication of aluminium MMCs & associated difficulties – A review - ScienceDirect |
scopus |
| 108 |
A REVIEW: SMART AGRICULTURE SYSTEM USING IOT |
Sudhir Yadav*1, Sumit Umrao*2, Yash Bhardwaj*3, Aviral Srivastava*4, Aditya Shukla*5, Subodh Kumar S |
Mechanical Engineering |
International Research Journal of Modernization in Engineering Technology and Science |
2021-22 |
2582-5208 |
|
https://drive.google.com/file/d/1r0LLQS8hPCVl33HUQkGye-f9PmzTiYXw/view?usp=sharing |
|
| 109 |
Methods to enhance the productivity of solar still: A review |
Vineet Kumar Vashishtha, Anil Kumar, Amit Pal |
Mechanical Engineering |
Materials Today Proceedings |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.04.022 |
https://drive.google.com/drive/folders/1btrUCUbOai3dB51cdu6RINoUltP7e5fS?usp=sharing |
SCOPUS |
| 110 |
Comparative analysis of different barriers in downstream supply chain |
Nishant Chaudhary, Aditya Srivastava, Aditya Dhar Dubey, Rahul Kumar Verma, Abhishek Yadav, Vivek KumarPathak |
Mechanical Engineering |
materials today proceeding |
2021-22 |
|
https://doi.org/10.1016/j.matpr.2022.05.462 |
https://doi.org/10.1016/j.matpr.2022.05.462 |
scopus |
| 111 |
Analysis of supply chain: An application of Taguchi method |
V.K.Pathak, R.K.Patel, N.Kumar |
Mechanical Engineering |
materials today proceeding |
2022-23 |
|
|
|
|